Updated November 2026
Most Alexa devices update themselves in the background, but you can also check for updates manually and push a new software version to a specific device when needed. This guide shows you how to update Alexa devices through the Alexa app, how to confirm a device is current, and what to do when an update stalls. The process takes only a few minutes once your device is online.
Check Your Current Software Version First
Before you try to update anything, confirm what version your device is running. In the Alexa app, tap Devices, select the device you want to check, then open its settings (the gear icon). Look for the Software Version entry, which lists the build number currently installed. If you see a newer version available, the app typically shows an update notice on the device’s page.
Shopping for one? See our guide: 9 Best Alexa Compatible Devices for Smart Home Setups (2026).
How to Update Alexa Devices Through the Alexa App
For most Echo speakers and displays, the app is the easiest route. Manufacturers specify that devices download updates automatically when they are idle and connected to Wi-Fi, so a manual push is mainly useful when you want the update right away.
- Open the Alexa app and tap Devices at the bottom of the screen.
- Select Echo & Alexa, then choose the device you want to update.
- Tap the gear icon and look for Software Update or Check for Updates.
- If an update is listed, tap it and keep the device plugged in and powered on.
- Wait for the light ring or status indicator to finish its update pattern before using the device.
Do not unplug the speaker during the update. Interrupting the process is one of the most common reasons a device ends up needing a reset.
Update Alexa Devices by Voice Command
Some Echo models accept a simple voice request. Saying “Alexa, check for software updates” will prompt the device to look for a new version. If one is available, it will usually start downloading and installing on its own. This method is quick, but it gives you less visibility than the app, so verify the result afterward in the device settings.
Update Fire TV and Other Alexa-Enabled Hardware
Fire TV sticks and Fire TV Cube units handle updates through their own menus rather than the Alexa app. On the device, go to Settings, then My Fire TV, then About, and select Check for System Update. Third-party Alexa-compatible devices, such as smart plugs or light bulbs, update through the manufacturer’s own app, so check that brand’s support page for their process.
What to Do If an Update Won’t Install
If the update stalls or fails, check that the device has a stable Wi-Fi connection and at least a few gigabytes of storage available on Fire TV hardware. Restarting the device and running the update again resolves most failures. If the problem continues, a factory reset may be necessary, but consult the manufacturer’s support documentation first since a reset erases saved settings.
Common Mistakes to Avoid
- Unplugging the device while the update indicator is still active.
- Updating over a weak Wi-Fi signal, which often causes the download to fail partway through.
- Assuming third-party smart home gadgets update through the Alexa app when they usually use their own companion app.
- Skipping the version check, so you never confirm whether the update actually installed.
FAQ
Do Alexa devices update automatically?
Yes, most Echo devices and Fire TV hardware install updates automatically when they are idle and connected to power and Wi-Fi. Manual updates are useful when you want a new version immediately.
How long does an Alexa device update take?
Most updates finish within a few minutes, though the exact time depends on the update size and your internet speed. Keep the device powered on until the status light returns to normal.
Can I update an Alexa device without the app?
Some Echo models accept a voice command to check for updates, and Fire TV devices can update directly through their on-screen settings. The app remains the most reliable way to confirm the result.
Conclusion
Updating an Alexa device usually takes just a few taps in the Alexa app or a quick voice command. Check the software version afterward to confirm the install worked. If problems persist, the manufacturer’s support pages are the best next step.
Related reading
- Smart Speaker Alexa Devices: How to Choose and Set Up 7 Key Models
- Names for Alexa Devices: 60+ Ideas and How to Set Them Up
- How to Unsync Alexa Devices: A Step-by-Step Guide for Beginners
- How to Unpair Alexa Devices: A Step-by-Step Guide for Beginners
- How to Unlink Alexa Devices: A Step-by-Step Guide for Beginners

