Updated November 2026

Adding devices to a group on Alexa takes about two minutes in the Alexa app, and once it’s done, one voice command can control every device in that group at once. This guide covers how to create a group, add devices to it, and check that it works. It also covers the common reasons a device refuses to join a group.

Before You Start

Grouping only works for devices that Alexa can control directly. Lights, plugs, switches and most speakers qualify, but some devices from third-party apps may not appear as groupable. Make sure each device is already set up and responds to voice commands on its own before you try to group it.

Shopping for one? See our guide: 9 Best Alexa Compatible Devices for Smart Home Setups (2026).

You will need:

  • The Alexa app installed on your phone or tablet, signed in to the same account that owns the devices
  • Your devices connected to the same Wi-Fi network as your phone
  • A device type that matches the group, such as all lights or all speakers

How to Create a Group and Add Devices

Groups are created in the Alexa app under the Devices tab. You can make a group from scratch, then add devices to it one at a time.

  1. Open the Alexa app and tap the Devices icon at the bottom of the screen.
  2. Tap the + icon in the top-right corner and select Add Group.
  3. Enter a name for the group, such as “Kitchen Lights,” and tap Next.
  4. Select the devices you want in the group. Only devices of a compatible type appear in the list.
  5. Tap Save. The group now appears in your Devices list.

Adding Devices to an Existing Group

If the group already exists, you can add more devices without creating a new one.

  1. Go to Devices and tap Groups.
  2. Tap the group you want to change, then tap the edit icon (usually a pencil or three dots, depending on your app version).
  3. Tap Add devices, select the new devices, and tap Save.

Confirming the Group Works

Once the group is saved, test it with a voice command. Say something like “Alexa, turn on Kitchen Lights.” If every device responds, the group is set up correctly. If only some devices respond, open the group in the app and confirm each device is still listed and online.

You can also control the group from the app. Open the group, and the on-screen controls should affect all members at once.

Troubleshooting Grouping Problems

Most grouping problems come from a device being offline, being the wrong type, or being controlled through a different app. Check these in order before you try a reset.

Problem Likely cause What to try
Device missing from the list Device type doesn’t match the group Create a group only with devices of the same type
Device won’t join Device is offline Check Wi-Fi and power, then retry
Only some devices respond A device was removed or disconnected Open the group and re-add missing devices
Group responds slowly Weak Wi-Fi signal Move the router closer or restart it

If you need to start over, you can remove a device from a group and rebuild it. For help with that, see How to Ungroup Alexa Devices: A Step-by-Step Guide for Beginners. If a device has been linked to a different account, How to Unlink Alexa Devices: A Step-by-Step Guide for Beginners explains how to clear that connection first.

Tips for Better Groups

  • Name groups by room or function, such as “Bedroom Lights” or “Living Room Speakers,” so voice commands are easy to remember.
  • Avoid giving a group and a single device the same name, since Alexa may pick the wrong one.
  • Keep group members on the same Wi-Fi network to avoid delays.
  • If you plan to use a single voice command across several speakers, you may also want to read How to Play Music on All Alexa Devices: Step-by-Step Setup Guide.
  • Renaming devices before grouping them makes the group easier to manage. See How to Rename Alexa Devices: A Step-by-Step Guide for Beginners.

A smart plug helps when a non-smart lamp or appliance needs to join a group, since Alexa can then control it like any other device.

View on Amazon

Smart bulbs are the most common group members, and a matching set makes group control smoother because every bulb is the same type.

View on Amazon

FAQ

Can I add devices from different brands to one group?

Yes, as long as each device is compatible with Alexa and of the same type. A group can mix brands of smart lights, for example, but not lights and speakers.

Why does my device not appear when I create a group?

The device is likely offline or a different type from the others in the group. Check that it responds to its own voice command, then try again.

Do I need to delete a group to change its members?

No. You can edit an existing group and add or remove devices without deleting it.

Conclusion

Creating a group in the Alexa app takes just a few taps, and adding devices works the same way. Once the group is set up, test it with a voice command to confirm every device responds. If a device won’t join, check that it is online and the same type as the rest of the group.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our smart home guides, checking product details against manufacturer specifications and owner feedback.