How to Check Thermostat Wiring Compatibility
Check thermostat wiring compatibility without guessing: turn off power, remove the old faceplate, photograph the wires and terminal labels, then run the manufacturer's compatibility checker.
Home Device Guide Editors
Articles by Home Device Guide Editors
146 articles published
Smart Outlet Installation: What to Know Before You Start
Compare in-wall smart outlets and plug-in smart plugs, learn electrical requirements, and know when to call an electrician for safe installation.
How to Set Up a Smart Display in the Kitchen
Place your smart display away from heat and water, set up timers and recipes, use guest mode and voice profiles, and teach it your morning routine. This guide covers the whole setup.
How to Set Up a Wi-Fi Extender
Place the extender halfway between your router and the weak area, connect through WPS or the app, then test your signal. Use a separate network name if you want clear control.
Security Camera Night Vision Glare: Causes and Fixes
Ghostly white glow or hazy footage at night usually comes from infrared light reflecting near the lens. This guide explains the causes and step-by-step fixes.
Geofencing Automations Not Triggering: Fixes
Geofencing automations fail for a few common reasons: location permissions, battery saver settings, geofence radius, and household rules. This guide walks through each fix.
Multi-Room Audio Out of Sync: How to Fix It
Learn why your multi-room speakers are out of sync and how to fix it with practical steps for network, grouping, and settings adjustments.
Using a Smart Power Strip in a Home Office
A smart power strip gives you individual outlet control, scheduling, and energy monitoring for your home office. This guide covers what to look for and what to avoid.
How to Exclude and Reset a Z-Wave Device
Excluding a Z-Wave device before re-pairing prevents ghost nodes and stuck connections. Follow this guide to exclude, reset, re-include, and heal your mesh.
Managed vs Unmanaged Network Switch for a Smart Home
A network switch connects wired devices in your home. Unmanaged switches are plug-and-play; managed switches give you control over traffic, security, and monitoring.