Updated November 2026

The eufy SoloCam S340 solar wireless outdoor security camera is designed to run without a power cord, using a built-in solar panel to keep its battery topped up. This guide walks you through unboxing, charging, mounting and configuring the camera so it covers the spots you care about. Most of the work is in the placement, so give that step some extra thought.

What You Need Before You Start

Gather everything before you climb a ladder. The setup goes faster when your phone, Wi-Fi password and mounting hardware are within reach.

  • The camera, its solar panel and the included mounting bracket and screws
  • A smartphone with the eufy Security app installed
  • A 2.4 GHz Wi-Fi network and its password
  • A drill with a bit suited to your wall material, plus a pencil and a level
  • A microSD card if you plan to store clips locally (check the manufacturer’s listed maximum capacity before buying)

Step 1: Charge the Battery and Position the Solar Panel

Before mounting, give the battery a head start. Plug the included charger into the camera or panel, or set the panel in direct sun for several hours. Manufacturers generally recommend a full initial charge so the camera has enough reserve during its first setup and test runs.

When you mount the panel, aim it toward the sun’s path in your region. In the Northern Hemisphere that usually means a south-facing angle. Avoid spots shaded by eaves, trees or neighboring buildings for most of the day, since shade cuts charging sharply.

Step 2: Connect the Camera to Wi-Fi in the App

Install the eufy Security app, create an account and tap the option to add a device. Scan the QR code the app displays with the camera lens, then follow the prompts to join your network.

  1. Stand close to your router for the initial pairing, within the same room if possible.
  2. Enter your 2.4 GHz network name and password. Dual-band routers often show two networks, so pick the 2.4 GHz one.
  3. Wait for the firmware check to finish. Updating before mounting avoids climbing up twice.
  4. Test a live view and a motion alert while the camera is still on your desk.

Step 3: Choose the Mounting Height and Angle

Mount the camera high enough to be out of easy reach but low enough to capture faces. Many installers aim for roughly 8 to 10 feet off the ground, angled slightly downward. A higher mount gives a wider view of the yard but makes faces harder to identify.

Use the level to keep the bracket straight, then drill pilot holes and secure the bracket. Attach the camera, then check the live view from the app and adjust the tilt until the walkway or door is centered in the frame.

Step 4: Set Motion Zones and Alert Rules

Motion zones cut down on false alerts. Draw the zone over the area you want monitored, such as the front path or driveway, and exclude the street, trees or a neighbor’s yard. Adjust sensitivity in small steps and run a walk-through test to see how it responds.

Scheduling Alerts

If you only want alerts at night or while you are away, set a schedule in the app. This reduces notifications during daytime activity you already expect.

Common Mistakes to Avoid

  • Mounting in deep shade, which leaves the battery underpowered during winter.
  • Pointing the camera straight into a light source or sunrise, which washes out footage.
  • Leaving motion zones covering busy streets, which floods your phone with alerts.
  • Skipping a firmware update before the final mount.
  • Ignoring weather ratings. Confirm the rating printed in the official specifications matches your climate.
  • Weatherproof outdoor extension cable or bracket spacer: helps reposition the camera or panel when a fixed mount does not clear an eave. View on Amazon
  • High-endurance microSD card: designed for continuous recording, useful if you keep local clips. View on Amazon

FAQ

Does the eufy SoloCam S340 need a subscription?

Core live viewing and motion alerts work without one. Check the official eufy site for current cloud storage options and what each plan includes.

Can I mount the solar panel separately from the camera?

Yes, the panel connects by cable, so you can place it in a sunnier spot. Keep the cable run short and protected from weather and pests.

Where can I find the latest setup instructions?

The manufacturer’s support pages and the in-app help section are the most reliable sources. Check them for current firmware steps and warranty details.

Conclusion

With a full charge, a sunny panel position and a well-drawn motion zone, the eufy SoloCam S340 can run with little attention. Spend most of your effort on the mounting height and angle, since that decides how useful the footage will be. For more on comparing options, see Top 5 Security Camera Wireless Outdoor Solar Powered Options for Home Monitoring.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our smart home guides, checking product details against manufacturer specifications and owner feedback.