Updated November 2026

To turn off Alexa looking for Bluetooth devices, you disable Bluetooth discovery in the Alexa app and turn off device alerts on your Echo. The change takes about two minutes and stops the nearby-device scanning and “looking for devices” announcements. Below, you will find the settings to change, a checklist of what to have ready, and the mistakes that cause the prompts to return.

Before You Start

Make sure you have the Alexa app installed on your phone and that you are signed into the same Amazon account as your Echo speaker. Note which Echo devices are showing the prompts, because some settings apply to a single speaker while others apply to your whole account. Have your phone’s Bluetooth turned on so the app can reach your devices during setup.

Shopping for one? See our guide: 9 Best Alexa Compatible Devices for Smart Home Setups (2026).

Turn Off Bluetooth Discovery in the Alexa App

The most common trigger is Bluetooth discovery, which lets your Echo scan for nearby pairable devices. Turning it off stops most of the background searching.

  1. Open the Alexa app and tap Devices at the bottom of the screen.
  2. Tap Echo & Alexa and select the Echo device that keeps looking for devices.
  3. Scroll to Bluetooth Devices and tap it.
  4. Tap Pair a New Device only if you are actively pairing something. Otherwise, select any paired device you no longer need and tap Forget This Device.
  5. Return to the device settings and look for a discovery or pairing option. Turn it off, or set the Echo’s pairing mode to off so it stops advertising itself.

Disable Bluetooth Device Notifications

Even with scanning reduced, your Echo may still announce that it found a device. Those announcements are controlled separately from scanning, so you need to adjust them too.

  • Open the Alexa app, go to Settings, then Alexa Notifications.
  • Find any Bluetooth or device-related alert category and switch it off.
  • On the Echo itself, you can also say “Alexa, stop” the next time the announcement plays, which silences that instance.

If you want to keep important alerts but silence the nearby-device chatter, see How to Turn Off Notifications on Alexa Devices: A Step-by-Step Guide for a more granular walkthrough.

Check Whether Other Echo Devices Are Causing It

In a home with several Echo speakers, one unit can detect another and trigger a search. Owners often report that the prompts seem to come from a single speaker that sits close to others. Review each device in the app and turn off the same options on every unit. For background on how these searches work between speakers, read Alexa Looking for Nearby Echo Devices: How to Fix and Set It Up (2026).

Common Mistakes

  • Turning off notifications but leaving Bluetooth pairing mode on, which keeps the scanning going.
  • Changing settings on only one Echo when the prompts come from another speaker in the same room.
  • Forgetting to check that the Alexa app is signed into the correct Amazon account.
  • Assuming a restart fixes the setting. A reboot clears temporary prompts but does not change saved preferences.
  • Pairing a new accessory without reviewing the Bluetooth list afterward, which can bring the search back.

A few items can make managing these settings simpler, especially in a home with several speakers.

  • Amazon Echo Dot works well as a secondary speaker you can position away from your main Echo, so you can tell which unit is producing the prompts. View on Amazon
  • Amazon Echo Show displays on-screen settings and alerts, which can make it easier to spot which device is announcing a search. View on Amazon

FAQ

Will turning off Bluetooth discovery affect my speaker’s music playback?

No. Turning off discovery only stops the search for new pairable devices. Music from Alexa, Wi-Fi streaming and voice commands continue to work normally.

Why does Alexa keep looking for Bluetooth devices after I changed the setting?

Usually another Echo in your home is still running discovery, or a paired device is re-triggering the search. Check every Echo in the app and remove any device you no longer use.

Can I turn off these announcements for good?

Yes, in most cases. Disabling both discovery and the related notifications in the Alexa app stops the announcements, and they should stay off unless you re-enable them or pair a new device.

Conclusion

Turning off Bluetooth discovery and the related notifications in the Alexa app stops most nearby-device searches. Check each Echo in your home, since one speaker can cause prompts on the others. If the scanning returns, review your paired devices and remove any you no longer use.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our smart home guides, checking product details against manufacturer specifications and owner feedback.