Updated November 2026
Ring video doorbell installation instructions boil down to five stages: confirm your power type, charge or connect the unit, mount the bracket, attach the doorbell, and finish setup in the Ring app. Most installs take under an hour if your door already has a doorbell button and you have a reliable Wi-Fi signal at the entry.
Why Installation Goes Wrong
Most failed installs trace back to three issues: a weak Wi-Fi signal at the door, a mismatch between the power source and the model, or skipping the app’s placement checks. Ring’s app walks you through each stage, but it cannot fix a bracket mounted too high or a wiring setup your transformer cannot support. Read the full guide before you remove the old doorbell, since reverting a bad wiring job is harder than doing it right the first time.
Shopping for one? See our guide: Installing Ring Video Doorbell: 3 Best Models Compared (2026).
Check Power, Wi-Fi and Mounting Height First
Start by identifying your power source. Battery models run on a rechargeable pack, while wired models use your existing doorbell wiring and a transformer that typically outputs 16 to 24 volts AC. Wired installs also need a working chime or a compatible chime kit to sound inside the home.
Next, test your Wi-Fi at the door. Stand where the doorbell will sit and check the signal on your phone. Ring recommends a stable connection, and a signal that drops to one bar often causes live-view lag or missed motion alerts. A Wi-Fi extender placed near the entry solves most of these problems.
For mounting height, most manufacturers suggest roughly 42 to 48 inches from the ground so the camera captures faces rather than tops of heads. Check the specific height in your model’s manual, since the recommended range varies.
Installation Steps That Prevent Rework
- Turn off power at the breaker before touching any wiring for wired models.
- Remove the old doorbell button and label the two wires, or photograph them, before disconnecting.
- Charge a battery model fully, or connect the wired setup to the transformer and chime.
- Mount the bracket level, using the included template to mark screw holes.
- Attach the doorbell to the bracket and secure the locking screw if your model has one.
- Restore power, open the Ring app, add the device and follow the on-screen placement and motion-zone prompts.
- Test the button, live view and chime from inside the home before closing the job.
If your house has a chime that will not sound after installation, the wiring is the usual cause. Check that the transformer is compatible with the Ring model and that both wires are secured under the terminals.
What We’d Use
A corner or angled mount helps when the door sits near a wall or outside light, and a compatible mounting bracket keeps the camera aligned during installs on brick or stucco. For a quick way to get the right fasteners, a basic drill and bit set helps with masonry.
- Ring-compatible mounting bracket for flat doorframes: View on Amazon
- Cordless drill with masonry bits for brick or stucco walls: View on Amazon
For detailed walkthroughs, see Ring Video Doorbell Installation: A Step-by-Step Guide for Beginners and Ring Video Doorbell Mounting: A Step-by-Step Guide for Beginners. If you are weighing power options before you start, Ring Video Doorbell Power Supply: Wired, Battery and Transformer Setup Guide explains each setup in detail.
FAQ
Do I need an electrician to install a Ring video doorbell?
Battery models require no wiring work, so most homeowners can install them alone. Wired installs involve line-voltage work at the breaker, so hire a licensed electrician if you are not comfortable with household wiring. Consult a professional if your transformer or chime looks damaged.
Why won’t my Ring doorbell connect to Wi-Fi during setup?
Check that your router uses 2.4 GHz, since many Ring models do not connect to 5 GHz-only networks. Also confirm that the password is typed correctly and that the device is within range of the router or an extender.
Can I install a Ring doorbell without a chime?
Yes, but you will need the app to receive alerts. Wired models still need a chime or a chime kit to sound inside the home, while battery models can operate without any wiring connected to the house.

