Updated November 2026
If your front door sits at an odd angle or your doorbell is mounted on a corner trim, an arlo video doorbell angle mounting plate is usually the simplest way to get the camera pointed where you need it. A generic corner kit can work on some surfaces, but it asks more from you during installation. This comparison looks at both so you can match the right option to your entryway.
| Criteria | Arlo Angle Mounting Plate | Generic Corner Kit |
|---|---|---|
| Designed for Arlo doorbell fit | Yes, built for the Arlo model | Varies by brand and model |
| Typical use case | Standard wall or slight angle | True corner or trim mounting |
| Installation effort | Low, uses existing screw points | Moderate, may need spacers |
| Camera field of view adjustment | Modest tilt correction | Greater angle correction |
| Compatibility checks needed | Few | More, check the fit first |
Fit and Compatibility
The Arlo-specific plate is designed around the mounting footprint of Arlo’s doorbell, so the screw holes and backplate line up without modification. Generic corner kits are sold to fit many doorbell brands, which means you need to confirm the mounting pattern before you buy. Winner: the Arlo angle mounting plate for anyone who wants a guaranteed fit.
Angle Correction and Field of View
A flat plate offers a small amount of tilt. That is enough for a door set slightly off plumb, but not for a door tucked into a recessed corner. Corner kits are built to push the camera outward more aggressively, which helps when the doorbell sits close to a wall corner and the view is partly blocked. Winner: the generic corner kit for sharper angles.
Installation and Clearance
The plate generally reuses your existing mounting screws, so the job takes little more than removing the doorbell, attaching the plate and reseating the unit. Corner kits often need spacers or extra fasteners, and you should measure the clearance around the door frame first. Check how much room the doorbell needs, since wires and trim can get in the way. Winner: the Arlo angle mounting plate for a quick, low-effort install.
Weather Sealing and Durability
Look for a plate with a gasket or a tight seal against the wall, because water can wick in along the edges if the fit is loose. Corner kits vary widely in build quality, and some use thinner plastic that may flex under wind or sun exposure over time. Owners often report that the mounting screws loosen faster on lightweight kits. Winner: the Arlo angle mounting plate, assuming the seal is intact.
Pros & Cons
Arlo Video Doorbell Angle Mounting Plate
- Pro: Built for the Arlo doorbell footprint, so the fit is predictable.
- Pro: Reuses existing screw points, which keeps installation simple.
- Con: Limited tilt, so it may not solve a deep corner mounting problem.
Generic Corner Kit
- Pro: Stronger angle correction for tight corners and trim.
- Pro: Available in many designs for different wall types.
- Con: Fit must be verified, and extra spacers may be required.
Which Should You Choose?
- Choose the Arlo plate if your door is only slightly angled and you want a guaranteed fit: View on Amazon
- Choose a corner kit if your doorbell sits in a true corner and the view is blocked: View on Amazon
Before you order either option, measure the mounting surface and note how the current doorbell is attached. For a broader look at corner options, see Top 3 Ring Video Doorbell Corner Kits for Angled Mounting. If you plan to route power through the door frame, Wired vs Battery Video Doorbells (and Cameras) explains which setup suits your wiring.
FAQ
Will an Arlo angle mounting plate fit any video doorbell?
No. It is designed around Arlo’s doorbell mounting footprint, so confirm your model before buying. Generic corner kits are the better choice for other brands.
Does a mounting plate affect motion detection?
It can, if the tilt pushes the field of view toward the wall or ground. Test the camera view after installation and adjust the angle if the motion zones look wrong.
Do I need to rewire my doorbell to use a corner kit?
Usually not, but the added depth can strain short wires. Check the wire length and terminal connections before you tighten the final screws. Worth reading next: Swann Evo Wireless Video Doorbell (2026): Which Should You Choose?.
Conclusion
For a slightly angled door, the Arlo angle mounting plate is the simpler and more predictable choice. If your doorbell is tucked into a true corner, a generic corner kit gives you more correction, provided you verify the fit first.

