Updated November 2026

An eufy security video doorbell add-on chime plugs into your existing doorbell wiring and sounds a tone inside your home whenever someone presses the button or your doorbell detects motion. This guide covers how to confirm compatibility, pair the chime with your doorbell in the eufy app, and place it so you actually hear it. Most setups take under an hour once the wiring is confirmed.

Confirm Compatibility Before You Buy or Install

Check that your chime is designed to work with your specific eufy video doorbell model. Eufy’s chime accessories are built around particular doorbell families, and pairing a chime with an unsupported doorbell usually fails at the pairing step. Look at the compatibility list in the product listing or the eufy support pages, and note your doorbell model number from the back of the unit or the app’s device info screen.

Also check your power situation. Battery doorbells and wired doorbells handle chimes differently, and some chime accessories need a wall outlet nearby. If you are unsure whether your doorbell is wired or battery-powered, see Wired vs Battery Video Doorbells (and Cameras) for a quick breakdown.

Pair the Chime With Your Doorbell

Pairing works through the eufy Security app, and the steps are similar across most eufy chime accessories:

  1. Plug the chime into a power outlet within Wi-Fi range of your router. Place it close to the doorbell for the first pairing, then move it later.
  2. Open the eufy Security app and select your doorbell from the device list.
  3. Go to device settings and look for the option to add or link a chime. Choose the chime type that matches your accessory.
  4. When prompted, press the chime’s pairing button until its indicator light changes. Wait for the app to confirm the connection.
  5. Press your doorbell button to test. The chime should sound within a second or two.

If pairing fails, the most common causes are a weak Wi-Fi signal at the chime’s location, an outdated app version, or a chime that is already linked to another account. Remove it from the old account first, then retry.

Set the Chime Tone and Volume

Once paired, open the chime settings in the app to pick a tone and volume level. Test each tone at the actual distance you expect to hear it from, such as the kitchen or a bedroom door. A chime that is audible from the doorstep may still be missed upstairs.

Place the Chime for Reliable Coverage

Placement determines whether the chime does its job. Keep these points in mind:

  • Mount or place the chime in a central room that you pass through often, such as a hallway or kitchen.
  • Stay within the router’s range. Walls, especially masonry or metal-backed ones, weaken signal, so test the connection before fixing the chime permanently.
  • Keep it away from large appliances that produce background noise, like dishwashers or washing machines, which can mask the tone.
  • If you have a multi-story home, consider a second chime upstairs rather than raising the volume on one unit.

Troubleshoot Common Issues

If the chime is silent after a button press, first confirm that the doorbell still shows as online in the app. Next, restart the chime by unplugging it for 10 seconds. If the doorbell notification arrives on your phone but the chime stays quiet, the problem is almost always the chime link or its power supply rather than the doorbell itself.

  • Wall-outlet extension cord with surge protection: Useful when the nearest outlet to your chime location is out of reach. View on Amazon
  • Adhesive cable clips: Keep the chime’s power cord tidy and out of foot traffic. View on Amazon

Tips and Common Mistakes

  • Do not assume a chime from one eufy doorbell family will work with another. Check compatibility first.
  • Keep the app and firmware updated, since pairing problems often trace back to outdated software.
  • Test the chime at its final location, not just during setup next to the router.
  • Review your notification settings so the chime does not sound for every motion event if that becomes disruptive.
  • For a broader look at alert pairings, see Ring Video Doorbell and Chime: 5 Best Pairings for Home Alerts (2026), which covers how chime ecosystems differ.

FAQ

Does the eufy security video doorbell add-on chime work with any doorbell?

No. It is designed for specific eufy doorbell models, so check the compatibility list before purchasing or pairing.

Why won’t my chime connect in the eufy app?

The usual causes are weak Wi-Fi at the chime’s location, an outdated app, or a chime still linked to another account. Remove the old link and retry from a spot closer to the router.

Can I add more than one chime?

Yes, many setups use multiple chimes for larger homes. Place each one in a different area so the tone reaches all rooms you use regularly.

Conclusion

A properly paired eufy security video doorbell add-on chime gives you reliable in-home alerts when the doorbell is pressed or motion is detected. Confirm compatibility, pair through the app, and test placement at the spot where you will actually hear it. Taking those steps first prevents most of the setup problems owners report.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our smart home guides, checking product details against manufacturer specifications and owner feedback.