Updated November 2026

To change WiFi on a Ring video doorbell, you open the Ring app, select your doorbell, and move it to a new network using the device settings menu. The process takes about ten minutes if your new network is 2.4 GHz and you have your router password handy. This guide covers the steps, what to check before you start, and what to do if the doorbell won’t reconnect.

Before You Start: What You Need

Gather these items so the switch goes smoothly. Ring doorbells only connect to 2.4 GHz networks, so confirm your new router broadcasts that band.

Shopping for one? See our guide: Installing Ring Video Doorbell: 3 Best Models Compared (2026).

  • Your Ring account email and password
  • The Ring app installed on a phone with the new WiFi network in range
  • The new WiFi network name (SSID) and password
  • Your doorbell powered on and within about 10 feet of your router during setup
  • A way to reach the doorbell’s setup button, which is usually on the front or side of the device

If your doorbell is wired, keep it powered. Battery models should be charged to at least half before you begin, since the reconnection process uses extra power.

Step-by-Step: Changing the WiFi Network in the Ring App

  1. Open the Ring app and tap the three-line menu icon in the top left corner.
  2. Select Devices, then choose your video doorbell from the list.
  3. Tap the gear icon for device settings.
  4. Scroll down to Device Health and tap Change WiFi Network. Some app versions label this Device Settings > Wi-Fi Network.
  5. Follow the prompts to select your new network and enter its password.
  6. Wait for the app to confirm the connection. The doorbell’s light will flash during this stage.

Reconnecting When the App Path Doesn’t Work

If the doorbell has lost its connection entirely, you may not reach the settings menu. In that case, you can put the device into setup mode manually and run the Ring app’s new-device setup flow instead.

Entering Setup Mode

Press and hold the setup button for about 10 to 20 seconds until the light starts flashing in a pattern. Release it, then follow the in-app prompts to add the device again. Ring’s own help pages list the exact light pattern for your model, so check them if the flashing looks different from what the app describes.

Checking Signal Strength After the Switch

Once the doorbell reconnects, check its signal in the app’s Device Health screen. Signal strength is shown as a bar or label. If it reads weak, move the router closer, add a mesh node, or relocate the doorbell. Many owners report that a weak signal causes delayed motion alerts and choppy live video, so it is worth fixing before you walk away.

Common Mistakes

  • Choosing a 5 GHz network. Ring doorbells need 2.4 GHz, so confirm your router’s band settings first.
  • Mistyping the WiFi password. Passwords are case-sensitive, so re-enter it carefully.
  • Forgetting to update the Ring app. An outdated app can hide the Change WiFi option or fail during setup.
  • Skipping the health check. A connection that works briefly may still be too weak for reliable alerts.

A mesh WiFi system helps when the doorbell sits at the edge of your router’s range, because it extends coverage to the front door without changing your main network.

View on Amazon

A WiFi extender placed between the router and the doorbell can also strengthen the signal if a full mesh system is more than you need.

View on Amazon

FAQ

Why won’t my Ring doorbell connect to my new WiFi?

The most common cause is a 5 GHz-only network, since Ring doorbells require 2.4 GHz. Check that your router broadcasts the 2.4 GHz band and that the password is entered correctly.

Do I need to reset my Ring doorbell to change WiFi?

Usually no. You can switch networks from the app’s device settings without a factory reset. A reset is only needed if the device won’t respond at all.

Will changing WiFi erase my recorded videos?

Changing networks does not delete recordings already saved to your Ring account. Recordings stored in the cloud remain available under your subscription, if you have one.

Conclusion

Changing WiFi on a Ring video doorbell takes a few minutes in the Ring app, provided your new network runs on 2.4 GHz. If the app path fails, put the device into setup mode and add it again. Check signal strength afterward to make sure alerts and live video stay reliable.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our smart home guides, checking product details against manufacturer specifications and owner feedback.