By Claire WhitakerUpdated November 2026
A ring video doorbell replacement battery is a practical choice for owners of the Ring Doorbell S2 (2nd Generation) who want to keep their doorbell running without removing it from the wall every few months. This review covers the WONKEGONKE lithium pack rated at 5200mAh, aimed at the 6-pin version of the S2 Gen 2. It suits owners who already know their doorbell’s model and wiring style, want a lower-cost spare, and are comfortable swapping a battery pack themselves. It is a poor fit for anyone with a different Ring model, a 4-pin unit, or a doorbell that is hardwired to power. Buyers who want the longest possible runtime or a charger included may prefer the higher-capacity alternatives covered below.
WONKEGONKE for Ring Doorbell S2 Battery Replacement: for Ring Camera Doorbell S2 Model Gen 2 Generation Battery Doorbells Video for 2nd Generation Door Bell (6-Pin Version ONLY) Lithium 5200mAh
Product Overview
The WONKEGONKE battery is a third-party replacement pack designed to fit the Ring Doorbell S2 Generation 2 in its 6-pin configuration. Third-party packs like this one are widely sold as alternatives to Ring’s own replacement batteries, and they are typically positioned as a way to keep a battery-powered doorbell operating between recharges. Before buying any replacement, it is worth confirming your doorbell’s exact model and pin count, since mismatched packs will not seat or connect properly. You can usually find the model number on the back of the doorbell or in the Ring app under device details. If you are unsure whether your unit is a battery model at all, a guide on wired vs battery video doorbells is a useful starting point.
Because this is a generic replacement rather than an official Ring accessory, the main decision points are fit, capacity, and charging method. The listing describes it as a lithium pack, which is the chemistry most Ring battery doorbells use. Owners considering a swap should also think about how they will recharge: removing the pack for charging, or using a separate charging station, changes how practical the setup is day to day.
Key Features & Specifications
The table below lists only the specifications stated in the product name and listing. Details not confirmed by the listing are left out.
| Feature | Specification |
|---|---|
| Compatible model | Ring Doorbell S2, 2nd Generation |
| Pin configuration | 6-pin version only |
| Battery chemistry | Lithium |
| Capacity | 5200mAh |
| Type | Replacement battery pack |
| Manufacturer | WONKEGONKE (third-party) |
The “6-pin version only” wording is the single most important compatibility detail. Ring has used different connector layouts across its battery doorbell lines, and a pack built for one layout will not match another. Verify the pin count on your existing battery before ordering.
Pros & Cons
Pros
- Clearly labeled for a specific model and generation, which reduces guesswork at checkout.
- Lithium chemistry matches the battery type used in most Ring battery doorbells.
- A 5200mAh rating gives a meaningful capacity increase over many original packs, based on the listing.
- A lower-cost spare makes it easier to keep one charged while the other is in use.
- Useful for households that want to rotate batteries rather than wait for a single pack to recharge.
Cons
- Third-party packs are not made by Ring, so warranty coverage and support will differ from official parts.
- Only fits the 6-pin S2 Gen 2; owners of other Ring models will need a different pack.
- Battery life depends heavily on motion settings, video length, and local Wi-Fi strength, and no pack can offset heavy use.
- Owners should check whether the pack ships with charging hardware, since this is not clearly stated in the product name.
Performance Analysis
Battery performance in a video doorbell depends far more on usage than on capacity alone. Ring’s own documentation notes that frequent motion detection, live view, and recorded clips all draw more power, and that cold weather reduces usable capacity. A 5200mAh rating is a reasonable figure for this class of pack, but actual runtime will vary from household to household.
Owner discussions for third-party Ring batteries tend to focus on three themes. The first is fit: most reports describe a snug, correct fit when the pin count matches, and problems when it does not. The second is charge retention, where owners often mention that generic packs lose charge faster when left idle for long periods, so checking the battery level periodically is sensible. The third is charging convenience, where some buyers prefer a pack they can charge outside the doorbell and others prefer swapping in place. These patterns are general observations about the category rather than measured results for this specific pack.
To maximize runtime with any replacement, reduce the motion zones to the area that matters, lower video quality if your app allows it, and keep the doorbell within a strong Wi-Fi signal. If you use a solar setup, pairing a pack with a charger can extend how long it stays topped up; a guide to a solar charger for Ring video doorbell covers sizing options.
Who Should Buy This Product?
This pack makes sense for owners of the Ring Doorbell S2 Gen 2 with a 6-pin battery who want a replacement or spare and are comfortable with a third-party part. It also suits people who want to rotate two packs so the doorbell never goes offline during a recharge. Households with heavy motion activity may find a spare especially useful.
It is a poor choice for anyone with a different Ring model, a 4-pin battery, or a wired doorbell. Owners who want official Ring support and warranty coverage may prefer genuine parts. If you are not yet sure whether your doorbell is the right model, consult Ring’s product documentation or a qualified installer before purchasing.
Buying Guide
When shopping for a ring video doorbell replacement battery, work through these checks in order.
- Confirm the exact model. The S2 Gen 2 is not the same as other Ring doorbells. Check the model on the device or in the Ring app.
- Count the pins. Remove the existing battery and check the connector. A 6-pin layout must match a 6-pin pack.
- Compare capacity. Higher mAh ratings generally mean longer runtime between charges, though real results depend on use.
- Check the charging method. Decide whether you want to charge in place or remove the pack for charging, and confirm what is included.
- Review warranty terms. Third-party packs often carry different coverage than official Ring parts.
If you need a different capacity or a different compatible model, a few well-known alternatives are worth comparing. The Lesaps 2-Pack is a rechargeable set with a charger station, which suits owners who want two packs and a dedicated way to charge them.
Lesaps 2-Pack 7200mAh Replacement Battery for Ring Doorbell & Fast Charger | Rechargeable Camera Batteries with Charger Station for Ring Video Doorbell 2/3/3 Plus/4, Spotlight Cam, Stick Up Cam
The Replacement Ring Battery 2 Pack, 6040mAh is another option for owners who want a higher rated capacity across two packs and a model range that covers several Ring generations.
Replacement Ring Battery 2 Pack, 6040mAh Model v4 Rechargeable Battery for Wireless Ring Doorbell 2/3/4 Plus, Stick Up Cam & Spotlight Cam (2nd & 3rd Gen)/Peephole Cam, 3.65V for Indoor/Outdoor Use
For a broader view of battery doorbell options, see how to choose a video doorbell and best video doorbells: wired and battery picks.
FAQ
Will this battery fit my Ring Doorbell?
It is designed for the Ring Doorbell S2 Generation 2 in its 6-pin version only. Check your model and pin count before ordering. If your doorbell is a different generation or uses a different connector, this pack will not fit.
How do I know if my battery is 6-pin?
Remove the battery from the doorbell and count the metal contacts on the connector. Compare the layout to the product listing or to Ring’s documentation for your model.
How long does a replacement battery last?
Runtime depends on motion activity, video settings, temperature, and Wi-Fi strength. Owners generally report that heavy motion settings shorten charge life considerably. Reducing motion zones is one of the most effective adjustments.
Can I charge the battery while it is still in the doorbell?
Charging methods vary by pack. Check the product details for whether it supports in-place charging or requires removal, and whether charging hardware is included.
Is a third-party battery safe to use?
Use only packs from reputable sellers, avoid damaged or swollen batteries, and follow the manufacturer’s charging instructions. If you have concerns about battery safety, consult the manufacturer or a qualified professional.
Does a replacement battery void my Ring warranty?
Warranty terms differ by region and device. Review Ring’s current warranty documentation before installing any third-party part, since coverage for battery-related issues may be affected.
Should I buy one pack or two?
Two packs let you keep one charging while the other is in use, which helps avoid gaps in coverage. A single pack is enough for light use or occasional replacement.
Where can I learn to install the battery safely?
A step-by-step walkthrough is covered in our Ring video doorbell installation guide for beginners, which also explains how to power down and reseat the unit.
Final Verdict
The WONKEGONKE ring video doorbell replacement battery is a reasonable choice for owners of the 6-pin Ring Doorbell S2 Gen 2 who want a lithium spare at a budget-friendly level. Its strongest point is clear model targeting and a 5200mAh rating. Its main limitations are third-party warranty considerations, a narrow compatibility window, and runtime that depends heavily on how the doorbell is used. Confirm your pin count first, and this pack is a sensible option. If you need a different capacity or charging setup, compare the alternatives above.
View on AmazonRelated reading
- Top 5 Batteries for Ring Video Doorbell Options Compared (2026)
- Top 3 Ring Video Doorbell Parts for Repairs and Replacements
- Wired vs Battery Video Doorbells (and Cameras)
- Solar Charger for Ring Video Doorbell: Setup, Sizing and Tips (2026)
About Claire Whitaker
Claire Whitaker is part of our editorial team and reviews and edits our smart home guides, checking product details against manufacturer specifications and owner feedback.
