Updated November 2026
To change WiFi on a Kasa smart plug, you need to remove the plug from the Kasa app, reset it to factory settings, and then pair it again while connected to your new network. The process takes about five minutes once you have your new WiFi name and password ready. Kasa plugs only connect to 2.4 GHz networks, so confirm that your new router broadcasts that band before you start.
Before You Start
Gather a few things first so the switch goes smoothly. Your phone needs to be on the new WiFi network, not the old one. If your router combines 2.4 GHz and 5 GHz under one name, you may need to split them or check the router’s settings to confirm the 2.4 GHz band is active.
Shopping for one? See our guide: 4 Best Lutron Outdoor Smart Plugs for Patio Lights and Decor (2026).
- The new WiFi network name (SSID) and password
- Your smartphone, with the Kasa Smart app installed and signed in
- The plug within WiFi range, ideally no more than a few feet from the router during setup
- A pin or paperclip for the reset button, if you need a full reset
Step 1: Remove the Plug from the Old Network
Open the Kasa Smart app and select the plug from your device list. Tap the settings icon, usually a gear or three dots, and choose the option to delete or remove the device. This clears the plug’s link to the old network in the app, though the plug itself still holds the old WiFi details until you reset it.
Step 2: Reset the Plug to Factory Settings
Press and hold the plug’s reset button, typically located on the side or front, for about 10 seconds. The LED will blink, indicating the plug has returned to setup mode. Manufacturers specify that the exact blink pattern varies by model, so check your plug’s manual if the light behaves differently. Owners often report that a slow amber blink signals that the plug is ready to pair.
Step 3: Connect the Plug to Your New WiFi
With the plug in setup mode, open the Kasa app and tap the plus icon to add a device. Choose your plug model and follow the prompts. When asked, select the new 2.4 GHz network and enter its password. The app will connect the plug to the new network and confirm when the setup is complete. If you want to add voice control or automations afterward, see Setting Up Kasa Smart Plug: A Step-by-Step Guide for Beginners for naming the plug and grouping it with other devices.
Step 4: Confirm the Connection and Rename the Plug
Check that the plug appears as online in the app and that you can switch it on and off from your phone. Rename it if needed so it is easy to find in routines. If you use Alexa, you will need to relink the plug to your Alexa account after the WiFi change. How to Connect Kasa Smart Plug to Alexa: Step-by-Step Setup (2026) walks through that part.
Troubleshooting a Failed WiFi Change
If the plug will not join the new network, check that your router is broadcasting a 2.4 GHz band and that the password was typed correctly. Passwords are case-sensitive. A plug that blinks blue and orange after the change usually points to a network or pairing issue rather than a hardware fault, and Kasa Smart Plug Blinking Blue and Orange: What It Means and How to Fix It covers the likely causes. If the plug still refuses to connect after a reset and a retry, Kasa Smart Plug Not Connecting: 6 Fixes That Work (2026) lists additional checks.
Common Mistakes
- Trying to pair the plug while your phone is still on the old WiFi network
- Using a 5 GHz-only network, which Kasa plugs cannot join
- Skipping the factory reset and expecting the plug to switch networks on its own
- Mistyping the WiFi password, especially characters that look alike
- Moving the plug far from the router during setup, which can cause the connection to time out
Recommended Gear
A small pin or the tip of a paperclip is useful for pressing the reset button on recessed models. A standard outlet tester can confirm the plug is getting power before you troubleshoot the WiFi connection.
- A reset pin for recessed buttons: View on Amazon
- A basic outlet tester for checking power at the socket: View on Amazon
FAQ
Do I need to delete the plug in the app before changing WiFi?
It is not strictly required, but removing it first avoids confusion about which network the app is using. It also makes it easier to add the plug back cleanly after the reset.
Why won’t my Kasa plug find the new network?
Most often the router is only broadcasting 5 GHz, or the plug is still in normal mode instead of setup mode. Confirm the 2.4 GHz band is enabled and perform a full factory reset.
Will my schedules and automations survive a WiFi change?
Schedules are stored in the app and tied to the device, so they often need to be checked after re-adding the plug. Review them once the plug is back online to make sure nothing was lost.
Conclusion
Changing WiFi on a Kasa smart plug comes down to removing the old device, resetting it to factory settings, and pairing it again on your new 2.4 GHz network. Once it is back online, confirm control in the app and update any voice assistant links. Keep your new WiFi details handy so the next change takes only a few minutes.

